Johnd: Created page with "To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter Audio Assist™ and go to t..."

2018-05-07T17:52:40Z

Created page with "To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter [[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]] and go to t..."

New page

To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter [[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]] and go to the calibration menu (menu 3.2) and follow the audio prompt from the decoder. It will ask you to run the locomotive in a coasting condition and then a notch 8 condition. (PRO TIP: While on the calibration menu you can calibrate the coasting point by pressing function 1 or the notch 8 point by pressing button 2, even if the menu is telling you to do otherwise) <br>
Behind the scenes Audio Assist™ is saving the calibration data to [[{{NAMESPACE}}:CV_152|CV152 BEMF Calibration Low]] and [[{{NAMESPACE}}:CV_154|CV154 BEMF Calibration High]] both CV's can be programmed tweaked manually. TCS recommends calibrating using Audio Assist and then manually tweaking the CV's if need be.

Diesel Version 5:Auto Notching Calibration - Revision history

Johnd: Created page with "To calibrate your WOWDiesel locomotive so that it knows the ruling grade and downhill grades on your layout enter Audio Assist™ and go to t..."