Difference between revisions of "Diesel Version 5:CV 116"
(Created page with "{{Infobox |title = NMRA CV#116 |header1 = Sound Delay Time |label2 = Range of Values |data2 = 0-255 |label3 = Default Value |data3 = 3 }} == NMRA CV #116 (Sound Delay Time)...") |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 8: | Line 8: | ||
}} | }} | ||
| − | == NMRA CV | + | == NMRA CV 116 - Sound Delay Time == |
This CV controls how long the sound will delay after a speed command is received before changing the prime mover notch. This feature allows the sound and motor to better sync.<br> | This CV controls how long the sound will delay after a speed command is received before changing the prime mover notch. This feature allows the sound and motor to better sync.<br> | ||
<br> | <br> | ||
If you change the throttle from speed step 0 to full speed 10 speed steps at a time this will take a few seconds. Without a delay the decoder will most likely go from idle to notch 1, then from notch 1 to notch 8. With a delay the decoder will go from idle to notch 8 as it waits to see what the final desired speed is then calculates what notch to go to. | If you change the throttle from speed step 0 to full speed 10 speed steps at a time this will take a few seconds. Without a delay the decoder will most likely go from idle to notch 1, then from notch 1 to notch 8. With a delay the decoder will go from idle to notch 8 as it waits to see what the final desired speed is then calculates what notch to go to. | ||
| − | + | <br> | |
| − | + | <br> | |
| + | ''' Example ''' | ||
To set the delay time multiply the desired time (in seconds) by 2 and program that value into CV116. For example if you want to give 2 seconds from when the speed command is sent/directional sound starts playing enter a value of 4 into CV116 | To set the delay time multiply the desired time (in seconds) by 2 and program that value into CV116. For example if you want to give 2 seconds from when the speed command is sent/directional sound starts playing enter a value of 4 into CV116 | ||
| − | + | <br> | |
| − | + | <br> | |
| + | ''' Related ''' | ||
[[{{NAMESPACE}}:CV_115|Motor Delay time]] | [[{{NAMESPACE}}:CV_115|Motor Delay time]] | ||
Latest revision as of 17:02, 20 September 2018
| Sound Delay Time | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 3 |
NMRA CV 116 - Sound Delay Time
This CV controls how long the sound will delay after a speed command is received before changing the prime mover notch. This feature allows the sound and motor to better sync.
If you change the throttle from speed step 0 to full speed 10 speed steps at a time this will take a few seconds. Without a delay the decoder will most likely go from idle to notch 1, then from notch 1 to notch 8. With a delay the decoder will go from idle to notch 8 as it waits to see what the final desired speed is then calculates what notch to go to.
Example
To set the delay time multiply the desired time (in seconds) by 2 and program that value into CV116. For example if you want to give 2 seconds from when the speed command is sent/directional sound starts playing enter a value of 4 into CV116
Related
Motor Delay time
