Difference between revisions of "Diesel Version 5:CV 23"
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
<br><br/> | <br><br/> | ||
This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add, 1-subtract). The product of this formula is added to the value in CV 3. In case of overflow (CV23 + CV3 > 255), the maximum acceleration rate shall be used (255). In case of underflow (CV3 + (-)CV23 < 0) no acceleration shall be used (0). The expected use of this configuration is for changing momentum to simulate differing train lengths/loads. Consisted/MU's tend to pull/push more cars, and therefore can have simulated higher loads by using this configuration. | This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add, 1-subtract). The product of this formula is added to the value in CV 3. In case of overflow (CV23 + CV3 > 255), the maximum acceleration rate shall be used (255). In case of underflow (CV3 + (-)CV23 < 0) no acceleration shall be used (0). The expected use of this configuration is for changing momentum to simulate differing train lengths/loads. Consisted/MU's tend to pull/push more cars, and therefore can have simulated higher loads by using this configuration. | ||
| + | <br><br/> | ||
| + | ''' Related: ''' | ||
| + | * [[{{NAMESPACE}}:CV_19|Consist Address]] | ||
| + | * [[{{NAMESPACE}}:CV_21|Consist Lighting (Part 1)]] | ||
| + | * [[{{NAMESPACE}}:CV_22|Consist Lighting (Part 2)]] | ||
| + | * [[{{NAMESPACE}}:CV_24|Consist Deceleration Adjustment]] | ||
| + | * [[{{NAMESPACE}}:CV_156|Dual Prime Mover Delay]] | ||
Latest revision as of 18:26, 2 October 2018
| Consist Acceleration Adjustment | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 0 |
NMRA CV 23 - Consist Acceleration Adjustment
This CV contains additional acceleration rate information that is to be added to or subtracted from the base value contained in Configuration Variable #3. This CV will only affect the momentum when CV19 is a non-0 value, meaning the decoder is configured for advanced consisting. The total momentum value can be calculated using the following formula:
([the contents of CV#23] multiplied by [0.896]) divided by (number of speed steps in use)
This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add, 1-subtract). The product of this formula is added to the value in CV 3. In case of overflow (CV23 + CV3 > 255), the maximum acceleration rate shall be used (255). In case of underflow (CV3 + (-)CV23 < 0) no acceleration shall be used (0). The expected use of this configuration is for changing momentum to simulate differing train lengths/loads. Consisted/MU's tend to pull/push more cars, and therefore can have simulated higher loads by using this configuration.
Related:
