Difference between revisions of "Diesel Version 5:Quick Presets"
(Created page with "A quick way to set up certain features using CV 8 {{{{NAMESPACE}}:Ditch_Light_Preset}}") |
|||
| Line 1: | Line 1: | ||
| − | A quick way to set up certain features using CV 8 | + | A quick way to set up certain features using CV 8<br> |
| + | Writing a value of 2 or 8 to cv8 will perform a factory reset<br> | ||
| + | the table below shows the available quick presets: | ||
| + | @TODO create table showing user presets and other values | ||
{{{{NAMESPACE}}:Ditch_Light_Preset}} | {{{{NAMESPACE}}:Ditch_Light_Preset}} | ||
Revision as of 14:22, 22 January 2019
A quick way to set up certain features using CV 8
Writing a value of 2 or 8 to cv8 will perform a factory reset
the table below shows the available quick presets:
@TODO create table showing user presets and other values
Ditch Light Preset:
Programming CV8 = 10 sets up blinking ditch lights. It puts the ditch lights on light output 1 and light output 2, turns the lights on and off with function 1, and causes them to blink along with blow the horn when function 2 is pressed.
CV's that get configured as part of the preset:
CV 35 = 1 Light output 1 turned on/off with button 1.
CV 36 = 1 Light output 2 turned on/off with button 1.
CV 51 = 42 Light output 1 set to Ditch Light, active while going forward and reverse.
CV 52 = 43 Light output 2 set to Ditch Light, active while going forward and reverse.
CV 124 = 8 Maps Ditch Light Blink to button 2. @TODO confirm this
CV 176 += 8 to make function 2 Dual Enabled
