Diesel Version 5:CV 116: Difference between revisions
(Created page with "{{Infobox |title = NMRA CV#116 |header1 = Sound Delay Time |label2 = Range of Values |data2 = 0-255 |label3 = Default Value |data3 = 3 }} == NMRA CV #116 (Sound Delay Time)...") |
(No difference)
|
Revision as of 21:01, 5 September 2018
Lua error: Internal error: The interpreter exited with status 1.
NMRA CV #116 (Sound Delay Time)
This CV controls how long the sound will delay after a speed command is received before changing the prime mover notch. This feature allows the sound and motor to better sync.
If you change the throttle from speed step 0 to full speed 10 speed steps at a time this will take a few seconds. Without a delay the decoder will most likely go from idle to notch 1, then from notch 1 to notch 8. With a delay the decoder will go from idle to notch 8 as it waits to see what the final desired speed is then calculates what notch to go to.
Example
To set the delay time multiply the desired time (in seconds) by 2 and program that value into CV116. For example if you want to give 2 seconds from when the speed command is sent/directional sound starts playing enter a value of 4 into CV116