Difference between revisions of "Diesel Version 5:CV 22"

From Train Control Systems Documentation
Jump to navigation Jump to search
(Created page with "== NMRA CV 22 (Consist Address Active for FL and F9-F12) == Defines for function FL whether the function is controlled by the consist address. For each Bit a value of "1" 15...")
 
Line 1: Line 1:
== NMRA CV 22  (Consist Address Active for FL and F9-F12) ==
 
 
Defines for function FL whether the function is controlled by the consist address. For each Bit a value of "1" 150 indicates that the function will respond to instructions addressed to the consist address. A value of "0"
 
indicates that the function will only respond to instructions addressed to the locomotive address. FL in the forward direction is indicated by bit 0, FL in the reverse direction is controlled by bit 1. Bit 2 corresponds to Allocation of these bits is done by the NMRA on an as needed basis. F9, while Bit 5 corresponds to F12.
 
 
 
{{Infobox
 
{{Infobox
|title = NMRA C 22
+
|title = NMRA CV 22
 
|header1 = Consist Address Active for FL and F9-F12
 
|header1 = Consist Address Active for FL and F9-F12
|label2 = 0-255
+
|label2 = Range of Values
|data2 = RANGE OF VALUES HERE
+
|data2 = 0-255
 
|label3 = Default Value
 
|label3 = Default Value
|data3 = DEFAULT VALUE
+
|data3 = 255
 
}}
 
}}
 +
 +
== NMRA CV 22  (Consist Address Active for FL and F9-F12) ==
 +
 +
Defines for function FL whether the function is controlled by the consist address. For each Bit a value of "1" indicates that the function will respond to instructions addressed to the consist address. A value of "0"
 +
indicates that the function will only respond to instructions addressed to the locomotive address. FL in the forward direction is indicated by bit 0, FL in the reverse direction is controlled by bit 1. Bit 2 corresponds to Allocation of these bits is done by the NMRA on an as needed basis. F9, while Bit 5 corresponds to F12.

Revision as of 14:55, 11 September 2018

NMRA CV 22
Consist Address Active for FL and F9-F12
Range of Values0-255
Default Value255

NMRA CV 22 (Consist Address Active for FL and F9-F12)

Defines for function FL whether the function is controlled by the consist address. For each Bit a value of "1" indicates that the function will respond to instructions addressed to the consist address. A value of "0" indicates that the function will only respond to instructions addressed to the locomotive address. FL in the forward direction is indicated by bit 0, FL in the reverse direction is controlled by bit 1. Bit 2 corresponds to Allocation of these bits is done by the NMRA on an as needed basis. F9, while Bit 5 corresponds to F12.