Difference between revisions of "Diesel Version 5:CV 3"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 8: | Line 8: | ||
}} | }} | ||
| − | == NMRA CV 3 | + | == NMRA CV 3 - Acceleration Rate == |
Determines the decoder's acceleration rate. The higher the value the longer it takes to accelerate. | Determines the decoder's acceleration rate. The higher the value the longer it takes to accelerate. | ||
Latest revision as of 19:23, 19 September 2018
| Acceleration Rate | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 20 |
NMRA CV 3 - Acceleration Rate
Determines the decoder's acceleration rate. The higher the value the longer it takes to accelerate.
This CV overwritten when the "Momentum Function" is pressed
The formula for the acceleration rate shall be equal to (the contents
of CV#3*.896)/(number of speed steps
in use). For example, if the contents of CV#3 =2, then the acceleration
is 0.064 sec/step for a decoder currently using 28 speed steps. If the content of this parameter equals "0" then
there is no programmed momentum during acceleration.
