Difference between revisions of "Diesel Version 5:CV 24"
(Created page with "== NMRA CV 24 (Deceleration Adjustment) == This Configuration Variable contains additional braking rate information that is to be added to or subtracted from the base value c...") |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
{{Infobox | {{Infobox | ||
| − | |title = NMRA | + | |title = NMRA CV 24 |
| − | |header1 = Deceleration Adjustment | + | |header1 = Consist Deceleration Adjustment |
|label2 = Range of Values | |label2 = Range of Values | ||
| − | |data2 = | + | |data2 = 0-255 |
|label3 = Default Value | |label3 = Default Value | ||
| − | |data3 = | + | |data3 = 0 |
}} | }} | ||
| + | |||
| + | == NMRA CV 24 - Consist Deceleration Adjustment == | ||
| + | This CV contains additional deceleration rate information that is to be added to or subtracted from the base value contained in Configuration Variable #4. This CV will only affect the momentum when CV19 is a non-0 value, meaning the decoder is configured for advanced consisting. The total momentum value can be calculated using the following formula: | ||
| + | <br><br/> | ||
| + | ([the contents of CV#24] multiplied by [0.896]) divided by (number of speed steps in use) | ||
| + | <br><br/> | ||
| + | This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add, 1-subtract). The product of this formula is added to the value in CV 3. In case of overflow (CV24 + CV4 > 255), the maximum deceleration rate shall be used (255). In case of underflow (CV4 + (-)CV24 < 0) no deceleration shall be used (0). The expected use of this configuration is for changing momentum to simulate differing train lengths/loads. Consisted/MU's tend to pull/push more cars, and therefore can have simulated higher loads by using this configuration. | ||
| + | <br><br/> | ||
| + | ''' Related: ''' | ||
| + | * [[{{NAMESPACE}}:CV_19|Consist Address]] | ||
| + | * [[{{NAMESPACE}}:CV_21|Consist Lighting (Part 1)]] | ||
| + | * [[{{NAMESPACE}}:CV_22|Consist Lighting (Part 2)]] | ||
| + | * [[{{NAMESPACE}}:CV_23|Consist Acceleration Adjustment]] | ||
| + | * [[{{NAMESPACE}}:CV_156|Dual Prime Mover Delay]] | ||
Latest revision as of 18:26, 2 October 2018
| Consist Deceleration Adjustment | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 0 |
NMRA CV 24 - Consist Deceleration Adjustment
This CV contains additional deceleration rate information that is to be added to or subtracted from the base value contained in Configuration Variable #4. This CV will only affect the momentum when CV19 is a non-0 value, meaning the decoder is configured for advanced consisting. The total momentum value can be calculated using the following formula:
([the contents of CV#24] multiplied by [0.896]) divided by (number of speed steps in use)
This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add, 1-subtract). The product of this formula is added to the value in CV 3. In case of overflow (CV24 + CV4 > 255), the maximum deceleration rate shall be used (255). In case of underflow (CV4 + (-)CV24 < 0) no deceleration shall be used (0). The expected use of this configuration is for changing momentum to simulate differing train lengths/loads. Consisted/MU's tend to pull/push more cars, and therefore can have simulated higher loads by using this configuration.
Related:
