Difference between revisions of "Diesel Version 5:CV 67"

From Train Control Systems Documentation
Jump to navigation Jump to search
(Created page with " [[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]]")
 
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
+
== NMRA CV 67 - Speed Table Step 1 ==
  
[[{{NAMESPACE}}:Audio_Assist™|Audio Assist™]]
+
The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds.  A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section).  See [[{{NAMESPACE}}:Speed_Table|Speed Table]] for more information on how to setup the Speed Table.
 +
 
 +
 
 +
{{Infobox
 +
|title = NMRA CV67
 +
|header1 = Speed Table
 +
|label2 = Range of Values
 +
|data2 = 0-255
 +
|label3 = Default Value
 +
|data3 = DEFAULT VALUE
 +
}}

Latest revision as of 20:49, 19 September 2018

NMRA CV 67 - Speed Table Step 1

The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds. A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section). See Speed Table for more information on how to setup the Speed Table.


NMRA CV67
Speed Table
Range of Values0-255
Default ValueDEFAULT VALUE