|
|
| Line 4: |
Line 4: |
| | ==Connecting to NCE systems== | | ==Connecting to NCE systems== |
| | | | |
| − | ===NCE USB Interface=== | + | ===ESU Cab Control=== |
| − | The NCE USB Interface provides a connection to a computer from your NCE DCC system. This allows users to program and operate from a computer using software.
| |
| | | | |
| − | [https://www.ncedcc.com/online-store/USB-Interface-for-Power-Cab-p38322160 NCE USB Device Product Page]
| |
| | | | |
| − | '''Drivers'''
| + | ===ESU EcoS=== |
| | | | |
| − | Non-Windows users may need to install additional drivers for their system to recognize the NCE USB Interface. You can find [https://ncedcc.zendesk.com/hc/en-us/articles/200590919-USB-Driver-Download-and-Installation-Instructions- download and installation instructions] on the NCE webpage. USB drivers for the NCE Power Cab USB board can be downloaded from [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Silicon Labs].
| |
| | | | |
| − | ===PowerHouse Pro===
| |
| − | The NCE PowerHouse Pro has a RS-232 port. Connect that port to your computer by using any off-the-shelf USB to RS-232 cable. Once the PowerHouse Pro connected via USB, start a JMRI WiThrottle server and connect with your UWT-100.
| |
| − |
| |
| − | ===WifiTrax WFD-30===
| |
| − | The WFD-30 device from WifiTrax provides true WiFi control of your layout using and existing NCE DCC system. The WFD-30 is NCE CAB Bus-compatible and will work with any NCE Command Station (Power Pro, Smart Booster, Power Cab, etc). The unit acts as a WiThrottle server using the WiThrottle protocol, just like JMRI, with optional loco roster and turnout list.
| |
| − |
| |
| − | There is no need to install JMRI or other third-party WiThrottle protocol client - just connect the WFD-30 to your NCE system, power up your throttle, scan for WiFi, and connect to the WFD-30 device.
| |
| − |
| |
| − | [http://wifitrax.com/products/product-WFD-30-detail.html WifiTrax WFD-30 Product Page]
| |
| − |
| |
| − | [http://wifitrax.com/appNotes/quickStart/WFD-30-Quick-Start.pdf WifiTrax WFD-30 Quick Start Guide]
| |
| | | | |
| | ==Operational Notes== | | ==Operational Notes== |
| | Coming Soon. | | Coming Soon. |
Revision as of 14:56, 9 March 2020
The UWT-100 Universal WiFi Throttle can be connected to NCE DCC systems in a variety of ways. Several options are listed below.
Connecting to NCE systems
ESU Cab Control
ESU EcoS
Operational Notes
Coming Soon.
