Difference between revisions of "Diesel Version 5:CV 67"

From Train Control Systems Documentation
Jump to navigation Jump to search
Line 1: Line 1:
 +
== NMRA CV 67  (Speed Table) ==
 +
 +
The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds.  A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section).  See [[{{NAMESPACE}}:Speed_Table|Speed Table]] for more information on how to setup the Speed Table.
 +
 +
 
{{Infobox
 
{{Infobox
|title = NMRA CV# 67
+
|title = NMRA CV67
|header1 = Speed Table
+
|header1 = Speed Table  
 
|label2 = Range of Values
 
|label2 = Range of Values
 
|data2 = 0-255
 
|data2 = 0-255
 
|label3 = Default Value
 
|label3 = Default Value
|data3 = X
+
|data3 = DEFAULT VALUE
 
}}
 
}}
 
== NMRA CV  (67) ==
 
The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds.  A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section).  See [[{{NAMESPACE}}:Speed_Table|Speed Table]] for more information on how to setup the Speed Table.
 

Revision as of 17:50, 28 June 2018

NMRA CV 67 (Speed Table)

The speed table is defined to be 28 bytes wide, consisting of 28 values for forward speeds. A digital controller that uses this table shall have at least 64 voltage drive levels and can have as many as 256 so that a smooth power curve can be constructed. Note that voltage drive levels are specified in integer values, in the same way as most other parameters. This means that a drive level of 1/4 maximum voltage corresponds to 0100000, not 0010000, as you would expect if the number specified a fraction with a fixed denominator, i.e. value 32 out of a fixed 128 levels (see Definitions section). See Speed Table for more information on how to setup the Speed Table.


NMRA CV67
Speed Table
Range of Values0-255
Default ValueDEFAULT VALUE