Difference between revisions of "Diesel Version 5:CV 152"
(Created page with "{{Infobox |title = NMRA CV 152 |header1 = BEMF Calibration Low |label2 = Range of Values |data2 = 0-255 |label3 = Default Value |data3 = 10 }} == NMRA CV 152 (BEMF Calibratio...") |
|||
| Line 8: | Line 8: | ||
}} | }} | ||
| − | == NMRA CV 152 | + | == NMRA CV 152 - BEMF Calibration Low Byte == |
This CV is a part of the [[{{NAMESPACE}}:Auto_Notching|Auto Notching]] Feature.<br> | This CV is a part of the [[{{NAMESPACE}}:Auto_Notching|Auto Notching]] Feature.<br> | ||
A Calibration can be done so that the WOWSound decoder knows when your locomotive is coasting and when its hauling a heavy load and play the appropriate sounds to match what the engine is doing. This CV is used to track when the locomotive is coasting.<br> | A Calibration can be done so that the WOWSound decoder knows when your locomotive is coasting and when its hauling a heavy load and play the appropriate sounds to match what the engine is doing. This CV is used to track when the locomotive is coasting.<br> | ||
Latest revision as of 21:29, 19 September 2018
| BEMF Calibration Low | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 10 |
NMRA CV 152 - BEMF Calibration Low Byte
This CV is a part of the Auto Notching Feature.
A Calibration can be done so that the WOWSound decoder knows when your locomotive is coasting and when its hauling a heavy load and play the appropriate sounds to match what the engine is doing. This CV is used to track when the locomotive is coasting.
Calibrating is done through Audio Assist™ (menu 3.2)
TCS suggests not adjusting this CV and using the calibration instead. If you find that the calibration does not work well for your locomotive this CV can be manually programmed. The lower the value in this CV the lighter the train load must be before the prime mover coasts (notches down to idle) while running in Prototype Throttle Mode @TODO create the Prototype throttle mode, detail how its more than just auto notching, it also sets the momentum levels when going between traditional and prototype mode, also change the link on the main page to this new link instead of the auto notching page
See the Auto Notching feature for more information on calibrating and auto notching.
