Difference between revisions of "Diesel Version 5:CV 28"
Jump to navigation
Jump to search
m (fixed defaults) |
|||
| Line 3: | Line 3: | ||
|header1 = Bi-Directional Communication Configuration | |header1 = Bi-Directional Communication Configuration | ||
|label2 = Range of Values | |label2 = Range of Values | ||
| − | |data2 = | + | |data2 = 0-255 |
|label3 = Default Value | |label3 = Default Value | ||
| − | |data3 = | + | |data3 = 19 |
}} | }} | ||
Latest revision as of 19:07, 2 October 2018
| Bi-Directional Communication Configuration | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 19 |
NMRA CV 28 - Bi-Directional Communication Configuration (RailCom)
Used to configure decoder’s Bi-Directional Communication characteristics when RailCom is enabled in CV 29.
- Note If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be set improperly (i.e. the bit should always contain its default value).
| Feature | Description | Default | Value |
|---|---|---|---|
| Channel 1 | If enabled, Channel 1 will broadcast the address. | ON | 1 |
| Channel 2 | If enabled, Channel 2 will send and receive data and provide acknowledgements. | ON | 2 |
| Programming Address 253 | Serves as a programming lock. If this setting is disabled, programming address 253 will be locked. | ON | 16 |
