Difference between revisions of "UWT-100 compatibility with NCE systems"
| Line 7: | Line 7: | ||
The NCE USB Interface provides a connection to a computer from your NCE DCC system. This allows users to program and operate from a computer using software. | The NCE USB Interface provides a connection to a computer from your NCE DCC system. This allows users to program and operate from a computer using software. | ||
| − | + | [https://www.ncedcc.com/online-store/USB-Interface-for-Power-Cab-p38322160 NCE USB Device Product Page] | |
| − | |||
| − | + | '''Drivers''' | |
| − | |||
| − | [https:// | + | Non-Windows users may need to install additional drivers for their system to recognize the NCE USB Interface. You can find [https://ncedcc.zendesk.com/hc/en-us/articles/200590919-USB-Driver-Download-and-Installation-Instructions- download and installation instructions] on the NCE webpage. USB drivers for the NCE Power Cab USB board can be downloaded from [https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx Silicon Labs]. |
===WifiTrax WFD-30=== | ===WifiTrax WFD-30=== | ||
Revision as of 20:01, 12 February 2020
Connecting to NCE systems
NCE USB Interface
The NCE USB Interface provides a connection to a computer from your NCE DCC system. This allows users to program and operate from a computer using software.
Drivers
Non-Windows users may need to install additional drivers for their system to recognize the NCE USB Interface. You can find download and installation instructions on the NCE webpage. USB drivers for the NCE Power Cab USB board can be downloaded from Silicon Labs.
WifiTrax WFD-30
The WFD-30 device from WifiTrax provides true WiFi control of your layout using and existing NCE DCC system. The WFD-30 is NCE CAB Bus-compatible and will work with any NCE Command Station (Power Pro, Smart Booster, Power Cab, etc). The unit acts as a WiThrottle server using the WiThrottle protocol, just like JMRI, with optional loco roster and turnout list.
There is no need to install JMRI or other third-party WiThrottle protocol client - just connect the WFD-30 to your NCE system, power up your throttle, scan for WiFi, and connect to the WFD-30 device.
WifiTrax WFD-30 Quick Start Guide
Operational Notes
Quirks about using the UWT-100 with NCE DCC systems.
