Difference between revisions of "Diesel Version 5:CV 9"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
== NMRA CV 9 (PWM Period) == | == NMRA CV 9 (PWM Period) == | ||
| + | THIS FEATURE IS NOT (YET) SUPPORTED BY THE WOWDIESEL V5 | ||
| + | |||
The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value. <br> | The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value. <br> | ||
The recommend formula for PWM period should be: <br><br> | The recommend formula for PWM period should be: <br><br> | ||
Revision as of 12:45, 23 August 2018
| PWM period | |
|---|---|
| Range of Values | 0-255 |
| Default Value | 0 |
NMRA CV 9 (PWM Period)
THIS FEATURE IS NOT (YET) SUPPORTED BY THE WOWDIESEL V5
The value of CV#9 sets the nominal PWM period at the decoder output and therefore the frequency is proportional to the reciprocal of the value.
The recommend formula for PWM period should be:
PWM period (uS) = (131 + MANTISSA x 4)x 2 EXP
Where MANTISSA is in bits 0-4 bits of CV#9 (low order) and EXP is bits 5-7 for CV#9. If the value programmed into CV-9 falls outside a decoder's capability, it is suggested (but not required) that the decoder "adjust" the value to the appropriate highest or lowest setting supported by the decoder
