Difference between revisions of "Diesel Version 5:CV 5"

From Train Control Systems Documentation
Jump to navigation Jump to search
Line 8: Line 8:
 
}}
 
}}
  
== NMRA CV 5 (VHigh) ==
+
== NMRA CV 5 Vhigh (Top Volts) ==
 
Vhigh is used to specify the motor voltage level at maximum speed.  This value is a fraction of available voltage.  When the contents of CV#5 equal 255 the full available voltage  will be applied.  Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated.
 
Vhigh is used to specify the motor voltage level at maximum speed.  This value is a fraction of available voltage.  When the contents of CV#5 equal 255 the full available voltage  will be applied.  Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated.

Revision as of 17:56, 19 September 2018

NMRA CV 5
VHigh
Range of Values0-255
Default Value0

NMRA CV 5 Vhigh (Top Volts)

Vhigh is used to specify the motor voltage level at maximum speed. This value is a fraction of available voltage. When the contents of CV#5 equal 255 the full available voltage will be applied. Values of 0 or 1 indicate that Vhigh is not used in the calculation of the speed table. VHigh require no other CV programming to be activated.