Diesel Version 5:CV 28

From Train Control Systems Documentation
Jump to navigation Jump to search

NMRA CV 28 - Bi-Directional Communication Configuration

Used to configure decoder’s Bi-Directional communication characteristics when CV29-Bit 3 is set Bit 0 = Enable/Disable Unsolicited Decoder Initiated Transmission “0” = Disabled “1” = Enabled Bit 1 = Enable/Disable Initiated Broadcast Transmission using Asymmetrical DCC Signal “0” = Disabled “1” = Enabled Bit 2 = Enable/Disable Initiated Broadcast Transmission using Signal Controlled Influence Signal "0" = Disabled "1" = Enabled Bits 3-5 = Reserved for future use. Bits 6-7 = Flag Bits, Reserved for future use

  • Note If the decoder does not support a feature contained in this table, it shall not allow the corresponding bit to be

set improperly (i.e. the bit should always contain its default value).

NMRA CV 28
Bi-Directional Communication Configuration
Range of ValuesRANGE OF VALUES HERE
Default ValueDEFAULT VALUE
Retrieved from "http://staging.tcsdcc.com/index.php?title=Diesel_Version_5:CV_28&oldid=789"