Diesel Version 5:Quick Presets
A quick way to set up certain features using CV 8
the table below shows the available quick presets:
@TODO Add links to the table to give more detail or show what the default CV values are?
Light output CV's
| Action | CV 8 Value |
|---|---|
| Factory reset | 2 or 8 |
| Reset Sound button mappings | 3 |
| Reset NMRA CV's 1-256 | 4 |
| Reset Indexed CV's | 5 |
| Reset 128 Step Speed Table | 6 |
| Load User Preset 1 | 10 |
| Load User Preset 2 | 11 |
| Load User Preset 3 | 12 |
| Setup Ditch Lights | 15 |
Ditch Light Preset:
Programming CV8 = 10 sets up blinking ditch lights. It puts the ditch lights on light output 1 and light output 2, turns the lights on and off with function 1, and causes them to blink along with blow the horn when function 2 is pressed.
CV's that get configured as part of the preset:
CV 35 = 1 Light output 1 turned on/off with button 1.
CV 36 = 1 Light output 2 turned on/off with button 1.
CV 51 = 42 Light output 1 set to Ditch Light, active while going forward and reverse.
CV 52 = 43 Light output 2 set to Ditch Light, active while going forward and reverse.
CV 124 = 8 Maps Ditch Light Blink to button 2. @TODO confirm this
CV 176 += 8 to make function 2 Dual Enabled