Diesel Version 5:CV 24
Revision as of 19:31, 19 September 2018 by Tcsdcc (talk | contribs) (→NMRA CV 24 (Deceleration Adjustment))
NMRA CV 24 - Deceleration Adjustment
This Configuration Variable contains additional braking rate information that is to be added to or subtracted from the base value contained in Configuration Variable #4 using the formula (the contents of CV#24*.896)/(number of speed steps in use). This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add,1-subtract). In case of overflow the maximum deceleration rate shall be used. In case of underflow no deceleration shall be used. The expected use is for changing momentum to simulate differing train lengths/loads, most often when operating in a consist.
| Deceleration Adjustment | |
|---|---|
| Range of Values | RANGE OF VALUES HERE |
| Default Value | DEFAULT VALUE |
