Diesel Version 5:CV 24

From Train Control Systems Documentation
Revision as of 21:04, 6 June 2018 by Shalee (talk | contribs)
Jump to navigation Jump to search

NMRA CV 24 (Deceleration Adjustment)

This Configuration Variable contains additional braking rate information that is to be added to or subtracted from the base value contained in Configuration Variable #4 using the formula (the contents of CV#24*.896)/(number of speed steps in use). This is a 7 bit value (bits 0-6) with bit 7 being reserved for a sign bit (0-add,1-subtract). In case of overflow the maximum deceleration rate shall be used. In case of underflow no deceleration shall be used. The expected use is for changing momentum to simulate differing train lengths/loads, most often when operating in a consist.


NMRA CV24
Deceleration Adjustment
Range of ValuesRANGE OF VALUES HERE
Default ValueDEFAULT VALUE