Diesel Version 5:Quick Presets

A quick way to set up certain features using CV 8
Writing a value of 2 or 8 to cv8 will perform a factory reset
the table below shows the available quick presets: @TODO create table showing user presets and other values

Ditch Light Preset:

Programming CV8 = 10 sets up blinking ditch lights. It puts the ditch lights on light output 1 and light output 2, turns the lights on and off with function 1, and causes them to blink along with blow the horn when function 2 is pressed.

CV's that get configured as part of the preset:

CV 35 = 1 Light output 1 turned on/off with button 1.
CV 36 = 1 Light output 2 turned on/off with button 1.
CV 51 = 42 Light output 1 set to Ditch Light, active while going forward and reverse.
CV 52 = 43 Light output 2 set to Ditch Light, active while going forward and reverse.
CV 124 = 8 Maps Ditch Light Blink to button 2. @TODO confirm this
CV 176 += 8 to make function 2 Dual Enabled